T-640 CNC VERTICAL MILLING MACHINING CENTER
High speed Drilling, Milling and Tapping Machining center
- High rigidity and high-speed feed system
- Three axis motor and precision high-speed ball screw direct transmission enhance rigidity and improve precision.
- The Z-axis use a brake motor system, which can keep high balance and sensitivity during rapid displacement, ensuring machining accuracy.
- The three axes use linear sliding rails, which have high rigidity, low noise, and low friction characteristics, allowing for rapid displacement and optimal circular accuracy.
- Rapid displacement XY/Z axis 48m/min
- Using Ball bar circular measurement, pre adjusting parameters, the best accuracy can be achieved.
Parameter Table :
| Model | T-640 |
| X axis travel | 600 mm |
| Y axis travel | 400 mm |
| Z axis travel | 350 mm |
| Worktable size | 700 mm × 420mm |
| Distance from spindle end face to work table | 150-500 mm |
| Distance from spindle center to column guide rail | 439 mm |
| Maximum load of worktable | 250 kg |
| T groove dimension | 3-14mm/100mm |
| Spindle taper hole | BT-30 |
| Maximum spindle speed | 20000 rpm |
| Spindle motor specification | 5.5 kw |
| Three axis motor specifications | 1.5×1.5×3 kw |
| Three axis maximum movement speed | 48 m/min |
| Automatic tool change type | Clamping arm type |
| Number of tools | 21 |
| Maximum tool length | 200 mm |
| Maximum weight of tool | 3 kg |
| Cutting speed | 1 – 12000 mm/min |
| Positioning accuracy | ±0.003mm/ 300mm |
| Repetitive positioning accuracy | ±0.005 mm |
| X-axis ball screw | Φ 25/16 mm |
| Y-axis ball screw | Φ 25/16 mm |
| Z-axis ball screw | Φ 36/16 mm |
| X-line track | 25 mm |
| Y-line track | 25 mm |
| Z-axis guide rail specification | 30 mm |
| Air pressure | ≥6 kg/cm² |
| Power | 15 kVA |
| Mechanicalweight | 3500 kg |
| Overall dimension (LxWxH) | 2000mm x 2150mm x 2650mm |
Configuration table:
| Standard Configuration | |
| Toolbox and adjustment tools | Spindle oil cooler |
| LED work lights | Program instructions |
| LED warning light | Tool magazine |
| Tool cooling system | CF card |
| Operation manual | Maintenance manual |
| Rear flushing device | Certificate of Conformity |
| Automatic lubrication system | Laser check list |
| Electrical box air conditioner | Transmission line |
| Electronic handwheel | |
| Selective Configuration | |
| BT40/50 blade and nozzle | Disassembly tool holder |
| Flat pliers pressing plate | Voltage regulator |
| Fourth axis (CNC indexing plate) | Fifth axis (fourth axis plus tilt axis) |
| Spindle center water outlet system | |
| Optional control system | |
| FANUC | SIEMENS |
| MITSUBISHI M80 | |
